Matrice 300 RTK + L1 Sensor

The Matrice 300 RTK takes inspiration from modern aviation systems. Offering up to 55 minutes of flight time, advanced AI capabilities, 6 Directional Sensing & Positioning, and more, the M300 RTK sets a whole new standard by combining intelligence with high-performance and unrivaled reliability. The Zenmuse L1 integrates a Livox Lidar module, a high-accuracy IMU, and a camera with a 1-inch CMOS on a 3-axis stabilized gimbal. When used with Matrice 300 RTK and DJI Terra, the L1 forms a complete solution that gives you real-time 3D data throughout the day, efficiently capturing the details of complex structures and delivering highly accurate reconstructed models

NOTE: To prepare the lidar data and create a LAS file, you need a GNSS base station.  It is recommended, for easiest processing, to use the DJI D-RTK 2 Base Station.  You can, however, use a CORS station or your own GNSS base station.  You will need to download and install DJI Terra to prepare the LAS file (point cloud).  You can download Terra here: https://www.dji.com/downloads/products/dji-terra

IN THE BOX:

1 x Matrice 300 Aircraft Body

1 x DJI Smart Controller Enterprise

1 x USB Charger (wall adapter)

1 x USB A - USB A Cable

1 x USB C - USB A Cable

1 x USB C - USB C Cable

2 x TB60 batteries

1 x WB37 Intelligent Battery

2 x 2110 Propeller (CW)

2 x 2110 Propeller (CCW)

2 x Landing Gear

1 x Carrying Case

1 x Manual

1 x L1 Sensor