Skip to content Skip to footer

Product Details

All Shipped Rentals are subject to a minimum Rental period (varies on product)

DJI - Zenmuse L1 Camera - Rental





Available : 1

Deposit Amount : $ 1490.00


Instant Clarity. Superior Accuracy.

A Lidar + RGB Solution for Aerial Surveying


The Zenmuse L1 integrates a Livox Lidar module, a high-accuracy IMU, and a camera with a 1-inch CMOS on a 3-axis stabilized gimbal. When used with Matrice 300 RTK and DJI Terra, the L1 forms a complete solution that gives you real-time 3D data throughout the day, efficiently capturing the details of complex structures and delivering highly accurate reconstructed models

Visualize Data as You Fly


LIVOX LIDAR MODULE
- Frame Lidar with up to 100% effective point cloud results
- Detection Range: 450m (80% reflectivity, 0 klx) / 190 m (10% reflectivity, 100 klx)
- Effective Point Rate: 240,000 pts/s
- Supports 3 Returns
- Line Scan Mode and Non-repetitive Petal Scan Mode

Everything in View
RGB CAMERA
- 20MP
- 1-inch CMOS
- Mechanical Shutter
Accurate Details at Your Disposal

HIGH-ACCURACY IMU
- Accuracy: 0.025° (roll/pitch) / 0.08° (yaw)
- Vision Sensor for Positioning Accuracy
- GNSS, IMU, RGB Data Fusion

Point Cloud LiveView

Real-time point clouds provide immediate insights onsite, so operators are informed to make critical decisions quickly.
You can also verify fieldwork quality by checking point cloud data immediately after each flight.

Measurement and Annotation
Acquire and communicate critical dimensions on the point cloud model using measurements and annotations.

One-stop Post-processing
DJI Terra fuses the IMU and GNSS data for point cloud and visible light calculations, in addition to conducting POS data calculations so you can effortlessly generate reconstructed models and accuracy reports.


NOTE: To prepare the lidar data and create a LAS file, you need a GNSS base station.  It is recommended, for easiest processing, to use the DJI D-RTK 2 Base Station.  You can, however, use a CORS station or your own GNSS base station.  You will need to download and install DJI Terra to prepare the LAS file (point cloud).  You can download Terra here: https://www.dji.com/downloads/products/dji-terra